en English
Share on facebook
Share on twitter
Share on linkedin

What are the advantages of SATA protocols such as PCI-E protocol and NVMe protocol?

For storage product developers, choosing different protocols means different development process and get different product performance, common protocols include SATA protocol, PCI-E protocol, NVMe protocol and so on, many experts say that NVMe will be a widely used mainstream protocol in the future.

SATA protocol

SATA is a serial ATA, a computer bus, the main function is used as a data transfer between the motherboard and mass storage devices, it is a completely different from the new type of parallel PATA hard disk interface type, compared to the past its biggest difference is the ability to check the transfer instructions, if found wrong will be automatically corrected, which to a large extent improves the reliability of data transmission. It is understood that SATA appeared in November 2000, SATA has completely replaced the old PATA interface of the old-style hard disk, due to the use of serial methods of data transmission and named, SATA bus has SATA 1.5Gbit / s, SATA 3Gbit / s, SATA 6Gbit / s, SATA Express and other specifications.

The emergence of SATA has had a great impact on the computer industry. On the one hand, the SATA standard allows parallel transmission to be replaced by serial transmission, which reduces line size, increases storage capacity per unit area, and improves storage speed for storage. Today’s most widely used is SATA 3.0, its biggest improvement is the bus maximum transmission bandwidth to 6Gbps of the spectrum, so as to significantly improve the connection port shareer and connector application space, storage and external applications, high performance, and increased life. It is understood that the advantage of SATA 3.0 specification is that it can provide 6Gbps speed link between the storage unit, disk drives, tape drives and host bus, etc., NCQ serial instructions for large bandwidth to ensure synchronous data transmission, backward compatibility with the old norms automatically reduce the speed of products down to 3Gbps.

SATA upgrades bring higher bandwidth, while the combination of SATA software architecture and PCI-Express high-speed interface, better storage compatibility, compatible storage devices and corresponding motherboard interfaces, this standard will enable solid state and hybrid drives to benefit from the new generation of PCI-Express 3.0 high-bandwidth, hybrid interface standard to bring greater performance experience. According to SanDisk information, SATA International is currently working on SATA 4.0 technology, and another performance upgrade is certain.


PCI-E protocol

This is a high-speed serial computer expansion bus standard, proposed by Intel in 2001, it is a high-speed serial point-to-point dual-channel high-bandwidth transmission, the connected devices to allocate exclusive channel bandwidth, not sharing bus bandwidth, mainly to support active power management, end-to-end reliability transmission and other functions.

It is understood that the PCI-E protocol to meet a certain period of time in the future the emergence of low-speed devices and high-speed equipment needs, the latest interface is the PCIe 3.0 interface, the new technology contains transmitter and receiver equalization, PLL improvements and clock data recovery and other new features. PCIE new technology is the advantage of bringing the bus frequency to enhance, can better support the future of high-end graphics cards, PCIE cable sub-norms can be Allowing PCI devices to connect to a computer over standardized copper cables allows co-processors such as graphics processing units and cryptographic processing units to be better connected to the central processor.

For the PCI-E protocol, the new PCIe 4.0 adds a number of features, and the key feature of the new PCIe version is that it doubles the bandwidth of the previous generation. According to the stakeholders, in theory, PCIe 4.0 x16 slots can reach approximately 32 GB per second of data flow in each direction, while PCIe 3.0 achieves a maximum speed of 16 GB / s. The new version of PCIe 4.0 has been designed to increase the speed of PCIe 4.0 slots and PCIe 3.0 slots. In addition to the increased speed of the components, PCIe 4.0 offers improved performance with better signal reliability and integrity. The most important thing to understand about PCIe 4.0 for running a PC at home is that it doubles the bandwidth of PCIe 3.0.

PCI-E technology will continue to be upgraded in the future, and in June 2018, the development of a new generation of SD 7.0 standard specifications was almost complete, with many vendors secretly working on product development, which has not yet been announced. Some vendors offer PCIe fiber products, but these are usually only available in certain situations, where transparent PCIe bridging is preferable to using more mainstream standards, and new products and systems are constantly being upgraded and matched.


NVMe and SCM

NVM Express is an open collection of standards and information to fully demonstrate the benefits of non-volatile storage in all types of computing environments from mobile devices to data centers. nVMe is designed from the ground up to provide high bandwidth and low latency storage access to current and future NVM technologies. nVMe is a data protocol and interface that helps accelerate enterprise resources and end-user systems. and storage drives to transfer data between them. Think of it as a larger pipeline that pushes large amounts of data to places where only a thin stream can move. This can be attributed to the massively parallel architecture of NVMe, whereas SAS is a serial protocol.

SCM, on the other hand, is a type of flash memory with a power supply that ensures availability in the event of a power outage or system crash.Alan Hopla, an expert systems engineer at Hitachi Vantara, explains that the combination of the two takes data sharing and storage to a new level, thus making it easier to use and store data as the demand for data continues to soar . SCM – a new family of storage devices – closes that gap, with about 100ns of existing storage capacity available in a single device,” he explained. DRAM technology provides latency between the existing NAND flash technology and about 100us. It introduces non-volatile storage with a wait time of about 10us, which is about one-tenth of that of traditional NAND flash technology.”

What does this mean for IT leaders? there are three ways that NVMe and SCM can improve the storage infrastructure and provide tangible benefits. nVMe supports hyperconvergence. nVMe drives have long been popular in organizations running hyperconverged computing solutions. they have been and can be easily integrated into hyperconverged environments and rapidly improve performance due to their architecture. They have been and can be easily integrated into hyperconverged environments and quickly improve performance due to their architecture. In short, NVMe has efficient logical device interfaces that reduce interface processing overhead, especially when compared to traditional interfaces such as SATA.

IT can get more information out of its data faster. Using NVMe as a mass storage tier and using SCM in a caching role greatly improves the processing and analysis of large data sets. This means IT and users will significantly reduce the time it takes to get results. The bottom line: this increased speed of results provides higher quality analysis, which allows organizations to be more flexible and react faster to changes in the operating environment. Increased end-user productivity. When users launch data-intensive applications, they can sit and spend a few minutes waiting for data to load.NVMe and SCM reduce the time it takes to load, share, and transfer data, which means increased productivity for everyone involved. It also means that IT departments are less likely to complain about slow processing speeds.

For storage product development, SATA protocol, PCI-E protocol and NVMe protocol each have their own advantages, mainly depends on the application scenario and product definition, engineers need to choose the most appropriate protocol, each to play their own performance.

Thanks for reading, Welcome to share your opinion

4 thoughts on “What are the advantages of SATA protocols such as PCI-E protocol and NVMe protocol?”

  1. Sounds delicious. I love anchovies. One of my favorite fishes to eat. Feel free to share your recipe here. I hope you had a great Christmas and hope your New Year is the best ever. Ferdinande Ange Susanna

  2. I have to say this post was certainly informative and contains useful content for enthusiastic visitors. I will definitely bookmark this website for future reference and further viewing. cheers a bunch for sharing this with us! Corissa Doyle Delfine

  3. The subsequent time I learn a blog, I hope that it doesnt disappoint me as much as this one. I imply, I do know it was my choice to learn, however I truly thought youd have something fascinating to say. All I hear is a bunch of whining about one thing that you can repair when you werent too busy in search of attention. Edithe Adolph Dasi

Leave a Reply to yerli film izle Cancel Reply

Your email address will not be published. Required fields are marked *

Let's Have A Chat

Learn How We Served 100+ Global Device Brands with our Products & Get Free Sample!!!

Email Popup Background 2